2019 Honda CRF250R

2019 Honda CRF250R
Red
MSRP: $7,999.00
Manufacturer: Honda
Condition: New

Description

The 250 motocross class just might be the most competitive in all of racing. If you give an inch on the track, there are 20 or 30 other guys waiting to eat your lunch and use you for traction. First lesson: Winning starts with the holeshot, and getting the holeshot is where Honda’s CRF250R excels. We gave it an all-new DOHC engine last year, and this year we’ve continued with upgrades and refinements. Lesson number two: Hold on to the lead once you’ve got it. On a 250 this can be tough, especially in the slower corners. No problem on a 2019 CRF250R—we’ve made specific improvements in power delivery to give you that critical edge in the tight stuff. The open-class guys can just point and shoot here, but on a 250 that’s where a race is won and lost, by inches. So use every advantage you have, because you know what? There’s going to be someone else on the starting line riding a 2019 CRF250R, and if you’re not, you’ll end up behind them.

Specifications

ENGINE

Engine Type
249cc liquid-cooled single-cylinder four-stroke
Bore And Stroke
79.0mm x 50.9mm
Induction
Programmed Fuel-Injection system (PGM-FI); 44mm throttle bore
Ignition
Full transistorized
Compression Ratio
13.9:1
Starter
Electric with lithium-iron-phosphate battery
Valve Train
DOHC, four-valve; 33mm intake, titanium; 26mm exhaust, titanium
 

DRIVE TRAIN

Transmission
Constant-mesh 5-speed return; manual
Final Drive
#520 Chain; 13T/48T
Clutch
Multiplate (5 springs)
 

CHASSIS / SUSPENSION / BRAKES

Front Suspension
49mm fully adjustable leading-axle inverted telescopic Showa SPG coil-spring fork; 12.0 inches travel
Rear Suspension
Pro-Link system; fully adjustable Showa single shock; 12.4 inches travel
Front Brake
Single 260mm hydraulic disc
Rear Brake
Single 240mm hydraulic disc
Front Tire
Dunlop Geomax MX3S 80/100-21 with tube
Rear Tire
Dunlop Geomax MX3S 100/90-19 with tube
 

DIMENSIONS

Rake (Caster Angle)
27° 22'
Trail
4.6 inches
Wheelbase
58.3 inches
Seat Height
37.8 inches
Curb Weight
237 pounds (Includes all standard equipment, required fluids and a full tank of fuel–ready to ride)
Fuel Capacity
1.6 gallons
Ground Clearance
12.9 inches
Length
85.9 inches
Width
32.5 inches
Height
50.2 inches
 

OTHER

Available Colors
Red
Model ID
CRF250R
 

Features

ENGINEERING

  • HRC Launch Control We’re talking about a special ECU program here: push the button to select the mode, hold the throttle open, release the clutch, and the CRF250R will do the rest, launching you into the first turn with a big advantage. It turns your bike into a holeshot-seeking machine!
  • Electric Start The CRF250R is equipped with an effortless electric starter. Convenient and lightweight, it’s a huge deal if you need to restart a stalled bike in the heat of battle.
  • New Gear-Position Engine Mapping Talk about smart: The CRF250R now features an ECU with special engine mapping for each gear. You can’t give an inch in this class, so having your engine deliver optimal power for each gear choice is one of the features that separates CRF250R riders from the rest.
  • Engine Mode Select Button This simple handlebar-mounted button lets you dial in engine power delivery character with a push of your thumb. Choose between Standard, Smooth and Aggressive, depending on track conditions.
  • DOHC Engine Layout The CRF250R uses a double-overhead-cam (DOHC) engine layout with a unique finger-follower rocker design. Together with the rest of the engine’s architecture (bore and stroke, intake tract, piston, and more), you get more power and a higher redline.
  • Titanium Intake and Exhaust Valves Light is right when it comes to a high-revving engine’s reciprocating masses. That’s why the CRF250R uses titanium intake and exhaust valves. Plus, the valve angle is a super-narrow 20.5 degrees (included). Ovalized valve springs and long-wearing Diamond-Like Carbon (DLC) treated finger rockers complete the package.
  • Downdraft Intake and Exhaust Layout The DOHC cylinder-head design let our engineers straighten out the CRF250R’s intake and exhaust tracts. The intake is shorter and just about arrow straight, and the exhaust flows more efficiently too. No athlete’s going to win a sprint if they try to run while holding their breath, and it’s no different with your bike’s engine. You’ll experience both more power and better throttle response.
  • Big Bore/Short Stroke The CRF250R’s 79mm bore and short 50.9mm stroke let our engineers create a high-revving engine with plenty of room for large valves. The engine breathes and revs—the two keys to making power in the motocross world.
  • Dual-Exhaust System The CRF250R’s dual-exhaust system is light, compact, and positioned close and low in the frame to take weight off the rear end and bring more mass to the bike’s center for improved handling. It also allows for more airflow, and that equals added horsepower.
  • Total Air Management Total air management means complete attention to how efficiently air gets through the intake, through the head, and out the exhaust. Eliminate losses here, and you make more power everywhere. And the best part? It’s free horsepower—you just need a bike with smart design.
  • Bridged-Box Piston A first for a Honda MX bike, the CRF250R features a bridged-box piston design developed on our factory racebikes. Why? The reinforcing structure between the skirts and the wrist-pin bosses lets this big-bore piston retain a light, strong construction and helps enable the CRF250R’s high redline.
  • “H” Section Crank Look closely at the CRF250R’s crankshaft profile and you’ll see its “H” cross-section design. What’s up with that? Just like a structural “I” beam in an aircraft wing or a skyscraper, it boosts strength and cuts weight over a conventional crank’s shape—a big deal when you consider this part spins at over 14,000 rpm!
  • Gradual Pipe-Bend Radius Notice how the CRF250R’s dual exhaust pipes make gradual, large-radius bends out of the head, then flow straight back to the mufflers with no abrupt angle changes. Getting the exhaust out of the engine—while still maintaining a tuned exhaust length, is the key to power, while the pipes’ low mass and twin-silencer design optimize the CRF250R’s center of mass for superior handling.
  • Clutch Design and Materials The CRF250R’s clutch uses two different types of friction material. Why? The clutch can handle the increased power of the engine without being any larger. The lighter rotating weight is directly related to how fast the engine revs.
  • Lithium-Iron-Phosphate Battery Like the rest of the CRF250R, the bike’s Lithium-Iron-Phosphate battery is both super light and high performing. In fact, it weighs less than half the weight of a conventional lead-acid battery.
  • Titanium Fuel Tank Every gram counts on a bike in the 250 class, which is why the 2019 CRF250R has a titanium fuel tank. Light and strong, it’s also thinner than our previous plastic unit, freeing up more space and helping to centralize fuel mass.
  • Engine Oil Scavenge Pump Deep in the engine, there’s a special oil scavenge pump. While you may never see it, it helps keep the CRF250R’s overall design compact.
  • Shared Engine/Gearbox Lubrication The 2019 CRF250R uses a shared engine/transmission oiling design. Why? Combining the two systems shaves weight and helps make the engine more compact, especially when it comes to placing the right-side cam drive and the clutch so close together.

PERFORMANCE

  • New Double-Spray Injector Settings The CRF250R’s fuel-injection system sprays twice per intake cycle. That helps increase fuel atomization without adding the weight or complexity of a second injector. The better fuel atomization means more power in the midrange and on over rev—you’ll feel it the first time you race.
  • New 2019 Cam Profiles With input directly from our HRC works team, we’ve changed the cam profiles on our 2019 model. You should feel the engine rev more freely, as well as improved torque feel in the bottom end.
  • New Throttle Body With a 2mm smaller venturi designed to speed up airflow, the CRF250R’s new throttle body really reaps benefits at low engine operating speeds. You get power and snap, right now.
  • Large Valve Diameters The CRF250R’s valves don’t just have impressive lift, the valves themselves are large-diameter too—33mm intakes and 26mm exhausts. Combined with the high lift, the twin-cam CRF250R flows a lot more, especially at high revs when you’re wicking it up.
  • High Redline With our better-breathing DOHC design and the big-bore/short-stroke engine, the CRF250R’s rev limit is way impressive. The same goes for peak power and peak torque.
  • More Power With the power updates for 2019, feel free to hold that throttle open and head for the first turn—the CRF250R is designed to win that critical holeshot drag race as well as increased low-end torque.

HANDLING

  • Showa Spring Fork The 49mm Showa fork features a conventional spring design that helps increase the CRF250R’s front-suspension precision, handling and feel. The 39mm piston diameter and 25mm rod diameter guarantee a plush feel and supple action.
  • Low Rear Shock Mount With its low rear shock mount on the frame, the CRF250R benefits from both a lower center of gravity (cg) as well as chassis stability.
  • Short Swingarm The CRF250R’s short swingarm helps make it light, and also helps give the bike better rear-wheel traction, important considering how much power you have on tap. The design also reduces the bike’s unsprung mass.
  • Dunlop MX3S Tires Developed using Dunlop’s latest “block-on-block” design technology, the CRF250R’s MX3S tires give excellent feedback and are a perfect complement to the CRF250R’s frame and suspension.
  • 260mm Front Brake The CRF250R’s large front-brake disc measures a whopping 260mm. You get great brake feel and a pattern that cuts down on weight. Front and rear brake-disc guards are part of the package too.

COMFORT

  • Smooth Styling Blending the CRF250R’s body panels does more than just make the bike look smooth, fast, and stylish. It also helps you move around on the bike while riding. Nothing wrong with smooth, fast, and stylish, though.
  • “In Mold” Graphics With the all the time you’ll be spending in victory circle, you need to look your best. The CRF250R has you covered. Our “in mold” graphics look great, and stay looking good longer.
  • Rear Subframe The 2019 CRF250R’s subframe uses extruded rear members that produce a 20-percent reduction in weight versus the previous generation. Since that weight comes off the top of the bike, it also contributes to the CRF250R’s low center of gravity.
  • Flat Seat/Tank Junction The 2019 CRF250R features a flat seat/tank junction, including a titanium fuel tank. The superior ergonomics make it easier to move forward and back on the bike, increasing your control.
  • New Black Rims They may not help you go faster, but the new black DID rims sure look good.

All inventory listed is subject to availability and prior sale. Manufacturer's Suggested Retail Price (MSRP) if shown for a vehicle excludes set-up, freight, taxes, title, licensing or other dealer charges, and is subject to change. Individual prices may vary. Please request a quote for specific pricing.

Request Quote or More Information